Benchrest Shooting
Some benchrest shooters prefer to shoot in a sideways position to get a better fit of the butt plate on the shoulder. For this purpose we have developed the ahg-angle plate art. no. 1024 as an additional accessory for the benchrest wedge art. no. 1023. Using the ahg-angle plate made from alu, the rifle on the rest is tilted at a 10° angle in shooting direction and guarantees the shooter tension free positioning for consecutive shots. Additional transverse slots allow putting the main stress of the rifle exactly on the middle of the benchrest wedge. Angle: 10° Weight: 204 g.
The new AHG Meisterschlitten (ahg-champion sled ) , specially developed for benchrest shooting, prevents any wobbling or slipping of the sporting equipment thanks to its robust construction made of aluminum and stainless steel, combined with its high dead weight and precise 2-point support. With the additional weights included in the scope of delivery, which can be moved for fine tuning, the maximum weight of the Meisterschlitten is a substantial 620 g. Thanks to the robust UIT mount, the sled can be attached to any fore-end with a UIT rail. Regardless of the longitudinal adjustment, the sled can be swiveled 25° to each side and is secured with two M5 screws.
Especially while bench rest shooting, the sturdy and continuously adjustable (towards the back, up to 13 cm) mechanism is being mounted to the original Anschützcheek piece adjustment (2213-8200) in order to optimize positioning. The continuous adjustment enables the shooter to find the optimal head position. The reverse adjustable cheek piece therefore offers sturdy, repeatable positioning; a relief for neck muscles. Any previous functions of the cheek piece adjustments are not influenced and can be used as usual. Suitable for all Anschütz rifles which are equipped with the cheek piece adjustment 2213-8200.
The Monoframe Deluxe includes a side blinder made of lexan to cover the not aiming eye. The blinder can be adjusted in angle with a stainless steal setscrew.For 25 mm Spectacle Lens. Your individual, improved spectacle lens is put in the ahg-monoframe. With the help of a set adapter and a clamp, the ahg-monoframe is mounted centrically in front of the sight disc or the iris disc. Therefore, your sight defect is corrected directly on the iris disc, consequently aiming mistakes are avoided to a large extend.Only spectacle lenses with an outer diameter of 24 mm can be used.ahg-monoframe does correspond to the presently valid rules of ISSF from 1.1.2017
Front part made from Amara-canvas-material mix, back made from firm but flexible Elastomer material covered with cotton. Amara material on the shoulders for better fitting short upper sleeve part improves positioning the hook butt Elastomer material on the back for best fit shoulder straps for best adjustment of the jacket screw-buttons allow individual adjustment button holes trimmed with piping for easy buttoning upper material: 50 % PUR, 22 % canvas, 27 % Amara lining: 100 % cotton
For benchrest shooters- double canvas in the back supports and stabilizes positioning- GRIP layer avoids sliding of the hook butt plate when in position- alu-buttons allow individual adjustment of the jacket- shoulder strap for fine adjustment- part in the back made from leather for comfortable wear - short sleeve optimizes positioning of the hook butt- leather frames on the button holes for easy buttoning of the jacketMaterial: 80 % cotton, 20 % leather, Inner: 100 % cotton This Jacket is also available as a made-to-measure-Jacket (surcharge 13%). Delivery time approximately 8 weeks.If you choose to buy this Jacket (as a made-to-measure) please press the following link, fill in the blanks and send it to us in the last step. We will contact you afterwards. https://ahg.hitex.cz/
- especially for shooters who want to have more movability for arm and shoulder without losing any stability of the shooting vest.- Also excellent suitable for bench rest-shooters, who want to have more volume and stability under their shooting jacket
Elegant, solid, and durable, and quick and easy to position at any time – the new ahg UIT weight, weighing 180 g, impresses with its high-quality workmanship in the finest stainless steel, paired with a functional design. Thanks to the unique “quick connect” system, the weight can be attached directly to the desired position on the UIT rail in a flash at any time, without having to remove existing accessories such as hand stops, weights, bipods, etc. Of course, the weight can then be moved continuously in the UIT rail as usual for fine tuning. Technical data: Dimensions: 50x28x17.5 Weight: 180g
the ammonition rest can be mounted on tripod 466
A stock designed for the KK bench rest shooting discipline with a low center of gravity. -Fine adjustable cheek piece- suitable for Anschütz Match 54 systems with round receiver- Mod. 1407- 1413- Mod. 1807- 1813- Mod. 1907 -1913 and 54.30Length-adjustable walnut thumbhole stock with cantilever suitable for all common butt platesVertically adjustable Precise cheek piece with fine adjustment, horizontal micrometer adjustment with up to approx. 40 mm backward displacement of the cheek piece.Continuous engraved scales ensure that the desired settings can be repeated easily and without confusion.The cheek piece settings can be adjusted in the fence without tools.The AS 300 stock is supplied without a wedge.The shooter therefore has the option of equipping the stock with the desired wedge. ahg – Benchrest Stock AS 300total length 880 – 920 mmweight approx. 2100 g
Sturdy yet very light support stool made of aluminum.Weighs only 3.5 kg The height is infinitely adjustable from 42cm to 54cm without adjustable feet and 46cm to 58cm with adjustable feet.Three-sided wooden seat for a comfortable sitting position. Maximum depth 33cm, maximum width 37cm. The tripod is foldable and the seat can be removed with a quick-release lever for space-saving transportation.
The ahg-MAX 300 benchrest slide combines in stages tilted benchrest adjustments up to max 20° . The toothed profile of the rail and carrier with 4 screws on either side guarantee a parallel and solid guidance.The 3-piece front connecting joint locks both rails in parallel or tilted position. A stabilizing bar (40 g) with 2 weight rings (30 g ea.) corrects the overall balance point of the rifle. The benchrest slide ahg-MAX 300 is mounted onto the forend stock by sliding 2 slot nuts into the stock rail. The integrated supporting legs can be used as bi-pods.- inclination/tilting max approx. 20°- resting width 60 mm- suitable for guns with T-nut- adjustable in length- simple mounting- total weight approx. 450 g
Support rail for straight shafts- Precise support due to inserted steel runners- Two neodymium magnets to mark the support position- Can be extended with Catamaran Eco - Weight- Length: approx. 352 mm- Width: approx. 58 mm- Weight: approx. 470 g
Due to a clever foot geometry and 4 individually adjustable legs, the benchrest stand SOLID can be adjusted to any position at the shooting range. Robust aluminum parts and 4 angle struts provide a high stability and steady position of the gun. For stepless adjustment, just turn and loosen the round plastic rest and fasten at the new required position. Also supplied is an infinitely adjustable ammo rest.Total height: 75 cmTotal weight: 2,8 kg
A butt plate modified to benchrest shooting requirements. Stability despite of versatile adjustment possibilities unified with sophisticated design. Universal joints offer stepless adjusting and three independently adjustable plates with rubber - a harmonic development of design and operation. The contact of shoulder and butt plate Ergonomic is ideally supported by a rubber layer on the alu parts. Releasing the shot gives a very comfortable and uniform feeling. The perforated rubber and the revolvingly perforated alu wings provide an absolutely anti-slip connection of the shoulder and butt plate Ergonomic. A market newcomer is the upper wing - equipped with a rasterized double joint - offering adjustment above and on the shoulder. Due to the stainless steel screw-on plate the butt plate Ergonomic can be mounted to all current match stocks. This plate can be adjusted in height in 5mm grids. The fine height adjustment works stepless with hand wheels. weight 320g
Advantages of the DoubleFit cheek piece - Two contact surfaces (zygomatic bone & upper jaw) ensure precise reproducibility.- Fast and precise acquisition of the target.- Parallax error is effectively minimized.- Suitable for both right and left-handed shooters.- The support surfaces can be rotated through 360°.- The support surfaces offer two different surfaces/edges. ISSF approved Mounting is simple and can be done by any shooter.Length: 180mmWeight: approx. 150gIf you own an Anschütz One or Steyr Challenger, you will also need a mounting kit. This is available separately.
eye blinder with screw for 9450 or 9451 from year of manufacture 2018
Front part made from Amara-canvas-material mix, back made from firm but flexible Elastomer material covered withcotton.• Amara material on the shoulders for better fitting• short upper sleeve part improves positioning the hook butt• Elastomer material on the back for best fit• shoulder straps for best adjustment of the jacket• screw-buttons allow individual adjustment• button holes trimmed with piping for easy buttoning• Top Grip padding• Upper material: 50 % PUR, 22 % Canvas, 27 % Amara• Lining: 100 % Cotton
Additional weight for the Catamaran Eco series- Set consisting of rod and 2 weights- Additional weights (27 g each) can be retrofitted- Weight of the set: approx. 115 g
Hand selected Qiang Yuan pellets Olympic for air rifle and pistolSingle packed in plastic boxes of 200 ea..Available in Headsizes 4,50 and 4,49 mm / cal..177Weight 0,53g / 8,2 gr 50/kt.
Qiang Yuan pellets for air rifle and pistolboxes of 500 ea.Available in Headsizes 4,49 and 4,50 / cal..177Weight 0,53g / 8,2 gr 40/kt.
Ergonomically designed rest grip for mounting on rest stocks with UIT profile. The resting grip allows the hand to be placed safely and with excellent "pull" downwards on the underside of the rifle instead of on top when resting. This prevents the rifle from accidentally tipping away. A further advantage is that the hand is not in the target picture. Requires a size 4 Allen key for mounting. Technical data Width: 20 mm Weight: 130 g Height: 40 mm Length: 125 mm Material: Aluminum
Fully multi-coated optics for maximum clarity 1" matte black anti-glare body tube 1/8 M.O.A BDC turrets for accurate adjustment, 1,82 mm per click at 50m ( NEW)Adjustable objective for parallax free shootingMaximum adjustment horizontal and vertical 90 M.O. Aeye relief 89 mm at x 4 and 76 mm at x 12incl. high mounts for 11 mm prismlength 336 mm weight 648 greticle KK50adjustable objective – 10m to infinityFOV 10 m at 100 m with x4 Waterproof, Shockproof and Fog ProofProtective lens caps 10 year Warranty