Cleaning

adapter for IG 1/8” on IG 8x32 inner

The cotton wicks are pressed into the barrel and remove all residues of gun powder and dirt. - The bolt remains on the rifle.- For rifles and pistols.- Untearable until 60 kg.- For all calibers including air rifle.- A light-weight set for easy and thorough cleaning- Simply by pulling.- Ready for use, no assembly required.

Refill pack for Art.-Nr. 505.- 50 cleaning patches.- For optimum gun care.- Absorbant and free of fluffs.

The alu guide is designed to assist the cleaning rod slide centrally and smoothly into the breech of your rifle, protecting the breech from any damage and prevents solvents and oils from leaking into the trigger/breech when cleaning.The ahg guide have a lock-in mechanism ( two O-rings), preventing movement whilst cleaning your barrel, to be sure that your cleaning rod is running parallel to the breech.

To clean rifles and pistols. Cleaning tube (86 cm) with rubber coating for cleaning pads and brushes. For cal. 4.5 mm and .22 l.r. Incl. brushes for cal. 4.5 and .22 l.r.  

500 Lend free pads made from 100 % cotton, 1"

Refill pack for Art.-Nr. 507.- 32 cotton wicks for rifles and pistols

For perfect blackening of front sight, rear sight and barrel.To be used like a lighter to darken the desired parts. Warning!Keep away from children. Upon igniting of the lighter and adjusting of thefl ame (if applicable) keep away from face and clothing. Contains fl ammablegas under pressure. Do not expose to temperatures exceeding 50 °C.Protect from sunlight. Do not pierce or place into fi re. Ascertain after eachuse that the fl ame is extinct completely. Do not keep lit for more than 30seconds.

 The corrosion protection of AirGhandi's gun care series reliably protects the barrel and other metal parts of the gun from corrosion and graying. It separates the metal and oxygen and binds mineral salts and combustion residues. It also encapsulates the salts of hand perspiration and provides optimum protection even in rain and increased humidity. The product can be applied very thinly and is therefore very economical.  ○    Protects against corrosion  ○    Excellent adhesion properties that provide a long duration of effectiveness  ○    The browning of the gun receives a high gloss finish  ○    Removes light flash rust  ○    The long-chain structure ensures that the grease stays in place and doesn't run off  ○    Neutral when used on plastics  ○    Can be used on all metals  

The stock oil of AirGhandi's gun care series preserves the properties of the wood and prevents natural wood degradation without using artificial dyes or dissolved plastics. It also prevents swelling and shrinkage by preventing water absorption and water release. The dissolved natural solids, such as the wood's own lignin, are absorbed deep into the wood, accentuating the grain.  ○    Suitable for the finest types of wood  ○    Moisture protection  ○    Restores the color  ○    Increases the mechanical resistance  ○    Prevents swelling, graying and rotting of the wood and protects against breakage of the stock due to material fatigue      

The temperature-resistant gun grease of AirGhandi's gun care series provides protection against wear and tear of your gun‘s parts. It was developed for use on firearms, but can also be used on melee weapons and spring-piston air rifles. Ceramic solids, which are heat resistant up to 1200°C, are used as a lubricant. The grease can be applied very sparingly.  ○    Extremely high temperature and pressure resistance ○    Higher long-term temperature resistance than silicone ○    Without plastics such as PTFE ○    Very high temperature resistance from -50° to +250°C ○    Long durability thanks to minimal wear of the ceramic particles ○    Additionally, protects against corrosion ○    Neutral when used on plastics and coatings   Caution: Causes severe eye irritation  

 The temperature-resistant gun lubrication oil of AirGhandi's gun care series provides protection against wear and tear of your gun’s parts. The practical precision dispenser ensures that the oil goes exactly where it should and can be used sparingly. It was developed for use on firearms, but can also be used on melee weapons and spring-piston air rifles. Ceramic solids, which are heat resistant up to 1200°C, are used as a lubricant.  ○    Extremely high temperature and pressure resistance  ○    Higher long-term temperature resistance than silicone  ○    Without plastics such as PTFE  ○    Very high temperature resistance from -50° to +250°C  ○    Extremely long durability thanks to minimal wear of the ceramic particles  ○    Additionally, protects against corrosion  ○    Neutral when used on plastics and coatings   Caution: Causes severe eye irritation 223,75 EUR / 100 ml  

Anschütz Gun Coating is a heavy-duty ceramic coating for all types of firearms and knives.Anschütz Gun Coating has excellent lubricating qualities, is free from residue and creates a transparent, dry film on the treated surface and provides long-lasting protection against corrosion, while the ceramic structures give the weapon a high-polish effect. The functionality and efficiency of the weapon is maintained even in very low temperatures, and theshooting precision is increased.Anschütz Gun Coating is suitable for metal and plastic. Even older weapons will shine after a single treatment.Effect:The high-performance coating acts like a ball bearing between galling surfaces. The ceramic mixture has a long-lasting effect. It gives the weapon a highpolish look and diminishes dust adhesion, providing maximum protection from corrosion. Anschütz Gun Coating evens out microscopically small cracks and grooves and smoothens the treated surfaces enduringly. It thus reduces wear to a minimumand improves the shooting performance.Application:Anschütz Gun Coating is suitable for almost any metal and plastic surface, even gold and silver ornaments remain protected for a long time. Anschütz GunCoating can be applied to all surfaces. It thus provides all-round protection for all parts of the weapon (pistol slides, barrels, triggers, bolts of any kind)Application inside the barrel: Clean barrel thoroughly, e.g. with GunCleaner. Then spray GunCoating inside the barrel or spread with a felt wad along the inside of the barrel. Finally wipe the barrel dry with a dry felt wad. In case of large calibres wait approximately two hours before firing the first shot until the “coating” has dried completely.Safety:Smoothing the treated surfaces largely prevents gunpowder-adhesion. The nongreasing and residue-free lubricating characteristics of Anschütz Gun Coating prevent malfunction and jamming in firearms.Advantages:transparent, residue free, non-greasing coatingsuitable for all types of firearms and knivesdiminished dust adhesionlong-lasting effecthighly economicalresistant to sea and fresh waterhighly temperature resistant (from -40 °C to +750 °C) Warning!Extremely fl ammable aerosol. Causes skin irritation. Causes serious eyedamage.Keep out of reach of children. Do not get in eyes, on skin oron clothing. IF SWALLOWED: call a poison center or doctor/physicianif you feel unwell. Pressurized can. May burst if heated. Protect fromsunlight. Do not expose to temperatures exceeding 50 °C/122 °F.Do not pierce or burn, even after use. Keep away from heat, sparks,open fl ames, not surfaces. No smoking. In use, May form fl ammable/explosive vapor-air mixture.    

100 pieces, for all calibers, very absorbent, extremely tear-resistant, free of fluffs. Material 100% Rayon At the heart of the cleaning system are the JW barrel cleaners, 140 x 50 mm cellulose rags: tear- and wet-resistant, absorbent, low-linting and biodegradable. Due to a special surface structure they have an excellent cleaning effect. By means of perforation, the barrel cleaners can be brought to the length required for the caliber.ApplicationDuring application, the barrel cleaners are first threaded into the center of the adapter. Then the cleaning rod is pushed through the barrel from the chamber side until the adapter protrudes from the barrel muzzle. The barrel cleaner is now pulled forward with the fingers so that the dirty side faces inward and the clean side of the cleaner is available for the reverse.  

brass brush, 3 per unit, suitable for cal. .22 l.r., inner thread 1/8”

    brass jag for 1” cotton pads, suitable for cal. .22 l.r., inner thread 1/8”

This carbon cleaning rod features toughness, tensile strength, flexibility and corrosion resistance. Damage to cartridge chamber or barrel by bending of the rod is almostimpossible.The lightweight carbon rod is inserted free of play with specially designed axial ball bearings in the grip, therefore, friction is extremely reduced. The cleaning materialthus follows exactly the barrel’s profile. The carbon cleaning rod is supplied in a set with brass peak for cotton patches, wool brush and feather brush for cal. .22 l.r., inner thread 1/8”.The specially designed feather brush adapts to the inner profile of the barrel, followsits twist and eliminates cartridge and gunshot residues. Technical data:Ø 5 mm, wiping length 900 mm, for cal. .22 l.r. to 6,5 mm, AG 1/8”

For small-bore target rifles Match 54 and 54.30.

  Cleaning rod guide for ANSCHÜTZ straight pull system models 1727 F, 1827 F & ahg F27 AThe new ANSCHÜTZ cleaning rod guide facilitates the cleaning of your ANSCHÜTZ rifle with straight pull bolt action.The use of this cleaning rod guide protects the cartridgeThe cleaning rod guide protects the cartridge chamber and the trigger unit from scratches, cleaning agents and residues from the barrel.Due to the low weight and alength of only 200 mm, this cleaning aid fits easily into any rifle case or holster.The cleaning rod guide is suitable for all cleaning rods and cleaning attachments up to .22 l.r. caliber.Technical data:Material: aluminiumcolor: blackDimensions (mm): 200Weight (g): 140                

Product information "Cleaning rod guide for model 1761" The new ANSCHÜTZ cleaning rod guide makes it easy to clean the ANSCHÜTZ 1761 in one simple operation. Simply remove the bolt and your magazine, install the cleaning rod guide just like your bolt. It locks into place with the catch on the receiver. Suitable for all Anschutz 1761 receiver, all caliber.   The original ANSCHÜTZ cleaning rod guide ensures that the cleaning rod is inserted into the barrel in a centred position, thus preventing damage to the chamber. Furthermore, the cleaning rod guide stabilises the rear part of the cleaning rod so that it cannot bend and touch the inner wall of your barrel.  

Cleaning set with brass jag, wool mop and feather brush for cal. .22 l.r.inner thread 1/8”

feather brush, 3 per unit, suitable for cal. .22 l.r., inner thread 1/8”

Special cleaner for cleaning all types of silencers Fluna SDR is a special cleaner and degreaser for the automatic cleaning of silencers. Fluna SDR automatically removes powder smoke and combustion residues from metal surfaces. Properties: Automatically cleans residue-free and degreases at the same time Easy to use, very good material compatibility

Fluna Tec TFT Optik-Schaumreiniger ist ein spezieller Schaum zur Reinigung von Jagd-Optiken, Computer Bildschirm, Mobiltelefonen, Brillen, Laptops sowie diversen Glas- und Kunststoffoberflächen. Wirkt antistatisch. - Lang anhaltender Reinigungsschaum - Reinigt schlierenfrei - Ohne Alkohol - Inhalt 100ml AerosoldoseEigenschaften: Spezial Reinigungs-Schaum Extrem hohe Standfestigkeit Hohe Reinigungskraft Dringt nicht ins Gehäuse ein Reinigt rückstandslos Enthält keinen Alkohol Einfache Anwendung