Butt Plates
Drastically reduced shooting times - not only in the finals but in competitions generally - call for ahg-clamp fast clamping screw for hook butt plate short adjustment periods when changing shooting positions In order to save time and keep cool it is essential to cut down professionally on time and handling. The new ahg-clamp makes all this possible. Ergonomically wings offer a quick and effortless loosening and tightening of the screws without additional tools. Using the ahg-clamp you can adjust the hook butt or cheek piece even when in position quite easily in height, depth or angle.
Air rifle Alu butt plate Master - For all shoulder sizes! Patented system for self-adjustment and pressure distribution. Five individual support elements, infinitely adjustable in all directions, guarantee the perfect fit for every shoulder. Rubberized anti-slip surfaces noticeably cushion recoil and hold the rifle securely in the stock. The narrow fit width of the upper contact element of only 18 mm as well as the lower one of only 8 mm are perfectly balanced. Each individual contact surface (contact element) is mounted on a ball and can therefore move freely in all directions. The individual contact elements can then be fixed as required. The base plate for mounting the aluminum cap on the butt plate cantilever is provided with a scale for repeatable and reproducible height adjustment. The upper and lower angle setting can be adjusted after opening the fixing screw by means of a fine adjustment screw and reproduced with repeat accuracy using the scale. Technical data Width: 25 mm Weight: 290 g Material: rubber / aluminum
Assembly set: clamp guide w. screws f. butt stock
Extended adjustment range without steps. Fast and tool-free height adjustment of the butt plate. Compatible to stocks with 1.81 inch column clamp. Individually adjustable positions of the height. Positioning of the butt plate is possible over center of barrel. 30 mm distance between column 12 mm diameter column The alu but plate item 001227 shown on the picture is not inclouded in the delivery Advantages: easy handling, fast adjustable and higher adjustment range - also perfect for 3-position.
A butt plate modified to small bore and big bore shooting requirements. Stability despite of versatile adjustment possibilities unified with sophisticated design. Universal joints offer stepless adjusting and three independently adjustable plates with rubber - a harmonic development of design and operation. The contact of shoulder and butt plate Ergonomic is ideally supported by a rubber layer on the alu parts. Releasing the shot gives a very comfortable and uniform feeling. The perforated rubber and the revolvingly perforated alu wings provide an absolutely anti-slip connection of the shoulder and butt plate Ergonomic. The butt plate hook is made from a combination of alu and steel, can be rastered in fine stages and stays safely in the adjusted position by the set toothing. A market newcomer is the upper wing - equipped with a rasterized double joint - offering adjustment above and on the shoulder. Due to the stainless steel screw-on plate the butt plate Ergonomic can be mounted to all current match stocks. This plate can be adjusted in height in 5mm grids. The fine height adjustment works stepless with hand wheels.
Butt plate interface, offers the opportunity to attached different butt plates on model 9015 ONE. Whether our aluminum butt plate 4759, the rubber butt plate 4709 A or any on the market available and common butt plates - the butt plate Interface allows easy and fast assembly of the butt plates at the ONE-stock.
FLEXIBLE USE, PERFECT FEEDBACKThe new ANSCHÜTZ air rifle butt plate PREMIUM offers highest flexibilityformounting on our different air rifle stocks. The high-strength individualparts made of aluminum can be quickly and comfortablyadapted to the personal needs • Suitable for ONE stocks, PRECISE stocksand the COMFORT butt plate carrier• Strong grip in the shoulder due to the milled-inaluminum profile directly in the wing elements• The butt plate is adjustable to any shoulder size young people - teenagers - adults• The wing elements can be adjusted continuously after opening the screws
Carrier for butt plate, diameter 12 mm ( not usable for Precise stocks ) 30 mm distance between column
- Complete with hook and guide plate. the hook but plate 001119 can be rotated tot he left or right about 30 degrees. The hook can be rotated 360 degrees.
PERFECT FOR EVERY SHOULDER SIZEPatented system for self-adjustment and pressure distribution. Six individual contact elements,infinitely adjustable in all directions, guarantee the perfect fit for every shoulder.Wire connection and rubberized anti-slip surfaces noticeably cushion recoil andkeep the rifle securely in position. The hook is adjustable in all directions.Can be mounted on all ANSCHÜTZ butt plate carriers of the small bore stocks. As well as other brands
The Anschütz hook butt RETRO mod. 4762 is a very well-known accessory for rifle shooters. Due to the demand from shooters, we have revived it with new design in technique and material. This product is 100 % made in Germany and extremely strong and supreme in small and big bore shooting. Fine adjustment of the incline results in a perfect fit to the shoulder. A highlight is the new construction of the hook. It allows the pure sideways swap of the hook which results in a perfect positioning of the rear stock vertically underneath the shooter’s head. The essential advantage is shown at the moment of the shot: distinctly more control and a more constant diversion of the recoil of the rifle. The rubberized contact area offers best grip between shoulder and hook butt avoiding sliding. This simple but thought-out hook butt impresses by inter-coordinated materials, not only in appearance but also in function and practice.
Aluminium butt plate.- Variably adjustable to any position.- Very good adhesion.- Suitable for all common air rifles.
The MEC Contact III Plus is the further development of the proven Contact III and combines compact design with maximum adjustability. Thanks to its narrow construction, it fits harmoniously into the stock and offers shooters maximum freedom of movement.The individually adjustable wings allow precise adjustment to the shoulder, while the fine height adjustment allows for exact adjustment. Thanks to the possibility of adjusting the butt plate very low, the Contact III Plus is specially designed for the requirements of modern shooting positions and for benchrest shooters.The Contact III Plus is also an interesting option for three-position shooters: in combination with Hook II or Hook III, it is ideal for use with sling shooting positions.
The classic has been modified to fit the new generation A hand adjustable screw enables vernier height adjustment Additional joints alow for variable adjustments Wing forms are exchangeable Wings are fully adjustable and revolvable The natural uncured rubber knops allow for perfect grip Compatible with all common match rifles Suitable for the following disciplines: offhand air rifle, 3-position and shooting air rifle off a rest
Reduce to the maxCompared to the Contact IV, the light version dispenses with the double joints.This greatly simplifies handling without significantly limiting the range of adjustability.- Fine-tuning the height adjustment with a hand-operated screw- Diverse adjustability options- Interchangeable wings- Perfect adhesion thanks to natural rubber knobs- Can be enhanced, e.g. with the “CIV full package”
Butt plate for Super-Match and sport guns Uncountable possibilities of variation Improved shape with grooving Steel wing holders Improved centre block Wing elements allow it to be placed up high, at an angle and rotate round the axle Fits all current sport rifles
Adjusting nut for 12mm diameter butt plate and cheek piece carrier columns
The revolutionary butt plate, consisting of self-supporting elements, provides previously unseen adjustment options. The MEC adapter for other butt plate carriers allows the connection of the ONE butt plate to other stocks. Delivery volume: ONE butt plate, adapter for other butt plate carriers, ONE ISSF filter and tools.
Product information "Precise butt plate extension KK with columns Ø 15mm" Adjustable aluminum cap boom with swiveling column guide. Quickly reproducible settings thanks to clear scales and aluminum stop nuts. Force- and form-fit clamping thanks to double aluminum stop nuts. Aluminum stop nuts also prevent the butt plate from slipping in the stop. Lightweight, high-strength aluminum construction. Stepless length adjustment. Reinforced pillars. Column spacing: 30 mm Column diameter: 15 mm Adjustment range: 70 mm Weight: 140 g Length: 90 mm Material: Aluminum